4. Dimensions
In the following tables dimensions are given for SKF standard hydraulic nuts HMV...E
(metric), and HMVC...E (inch) as well as for hydraulic nuts without threads, HMV...E/A101.
The nuts can also be made in other sizes, with special threads, or with unthreaded bores.
Additional information will be provided on request.
4.1 Hydraulic nuts - HMV...E series
Threads
HMV 10E - HMV 40E
HMV 41E - HMV 200E
Recommended mating threads
HMV 10E - HMV 40E
HMV 41E - HMV 200E
12
ISO 965/III-1980, tolerance class 6H
ISO 2901-1977, tolerance class 7H
ISO 965/III-1980, tolerance class 6g
ISO 2901-1977, tolerance class 7e
SKF HMV / HMVC