Led Functions - Ryobi P117 Manuel D'utilisation

CHARGING A HOT BATTERY PACK
When using a tool continuously, the battery pack may
become hot. A hot battery pack may be placed directly
onto the charger port but charging will not begin until the
battery temperature cools to within acceptable temperature
range. When a hot battery pack is placed on the charger, the
orange LED will begin fading. When the battery pack cools,
the charger will automatically begin charging.
MODE BATTERY PACK
Without
Power
battery pack
Hot or cold bat-
tery pack
Testing
Evaluating
Defective
Defective
• If defective, try to repeat the conditions a second time by removing and reinstalling the battery pack. If the LED status repeats a
second time, try charging a different battery.
• If a different battery charges normally, dispose of the defective pack (see battery pack operator's manual).
• If a different battery also indicates "Defective," the charger may be defective.
Charging
Charging
Charged
Battery full
Battery full /
Energy Save
Energy Save
Mode
mode
OPERATION
CHARGING A COLD BATTERY PACK
A cold battery pack may be placed directly onto the charger
port but charging will not begin until the battery temperature
warms to within acceptable temperature range When a cold
battery pack is placed on the charger, the orange LED will
begin fading. When the battery pack warms, the charger will
automatically begin charging.

LED FUNCTIONS

ORANGE RED GREEN
LED LED LED
Off On
Fading Off
Flash-
Off
ing
Off Fading Off
Off On Flashing Battery is being charged.
Off Off On
Off Off Fading
5 — English
Off Ready to charge battery pack.
The battery pack is either too hot or cold to ac-
Off cept a charge. When the battery pack reaches
a proper temperature, charging will resume.
Charger conditions battery until normal voltage
Off
is reached, then begins charge mode.
Battery pack or charger is defective.
Charging is complete; charger maintains charge
mode.
Battery pack is fully charged and charger is in
Energy Save mode.
ACTION