Sony VPL-VW590ES Guide De Référence Rapide page 20

5
Loosen the 3 screws on the lamp with
the Phillips screwdriver. Hold up the
handle, then pull the lamp straight out.
Handle
Notes
• Do not loosen other screws except the 3
specified screws.
• Hold the lamp by the handle to remove
and attach it.
20
GB
6
Push in the new lamp by the handle
securely until it reaches the end, and
then tighten the 3 screws.
Note
Be careful not to touch the optical block
inside the unit.
7
Close the lamp door (inner cover), and
then tighten the screw.
8
Close the lamp cover.