Optional Equipment - Kongskilde AIR WASH 50 Manuel D'utilisation

Optional equipment:

The hinge EDP no. 123105007 is
optional. If the Air Wash system
needs to be cleaned inside on a
regular basis, due to a demand for
handling of different types of mate-
When the hinge has been installed
and the motor is turned to an open
position, the gravity center of the
motor and the blower is inside the
How to use the hinge:
A
Disassemble the screw A
C
By turning of few rotations on the
bolt (C) the blower is lifted slightly
rial without risk of contamination,
the hinge is used.
The hinge is installed between the
cyclone and the blower inlet. By
turning a few rotations on a bolt
the blower is lifted slightly and thus
Closed position
foot print of the legs on the frame
work. For the purpose of stabilizing
the whole set up, in case a person
jumps on the system and thus
B
Disassemble the two screw B
The blower can now be turned
horizontal away from the top outlet
on the cyclone
hanging on a vertical shaft making
it possible to turn it horizontal away
from the top outlet on the cyclone.
Access to cleaning the inside of the
cyclone and the blower with a com-
pressed air nozzle is then possible.
Open position
Hinge section
makes it unstable, it is recommend-
ed to bolt the feet on the frame legs
to the floor.
7