Connection; Mounting The Cooker Hood - Pelgrim Bega970Mat Notice D'utilisation

INSTALLATION

Connection

Mounting the cooker hood

EN 16
Electrical connections
This appliance is a Class II appliance and must be earthed.
Check to make sure that the voltage specified on the type plate
matches the mains voltage. The appliance must be connected to the
mains as follows:
BROWN = L (live)
BLUE = N (neutral)
This cooker hood is fitted with a plug. Install the cooker hood so that
the plug is accessible. It is preferable to fit the wall socket out of sight,
behind the chimney cover.
Note: When you make a fixed connection to the mains you must make
sure that the live wire is connected to an omnipolar switch with a break
contact distance of at least 3 mm.
The installation instructions are included separate.
Max. 125 cm