Britax EMBLEM ALLEGIANCE Guide D'utilisation page 41

8� Nest the end of the right
9� Hook the harness straps
Replacing the Impact Absorbing Chest Pads
1� Loosen the harness�
2� From the back of the
3� Pull one harness strap
4� Route the harness strap
5� Reroute the harness strap
6� Repeat for other strap�
14878600_A-1_USER GUIDE, EMBLEM ALLEGIANCE, CAN_BOOK.indb 39 14878600_A-1_USER GUIDE, EMBLEM ALLEGIANCE, CAN_BOOK.indb 39
EMBLEM/ALLEGIANCE Canadian User Guide
harness strap into the left�
onto the yoke� Ensure that
the harness straps are not
twisted and that the ends
of the harness straps are
securely attached to the
yoke�
IMPORTANT: Store the
chest pads in a safe
location when not in use�
a� Lift harness adjuster
lever�
b� Pull both harness
straps forward�
seat, unhook the harness
straps from the yoke�
NOTE: Do not pull the
harness adjuster strap
after removing harness
straps from yoke.
through the harness slot
to the front of the seat�
out of the comfort pad
and chest clip�
through the chest pad,
chest clip, and comfort
pad�
1b
1a
39
11/16/23 10:47 AM 11/16/23 10:47 AM