Britax EMBLEM ALLEGIANCE Guide D'utilisation page 25

1� Unbuckle the harness and
2� Route the belly pad
3� Slide the buckle retainer
Using the Harness Buckle To Fasten:
1� Insert one tongue at a
To Release:
1� Press the release button
Using the Chest Clip
1� Open the chest clip�
2� Push together
14878600_A-1_USER GUIDE, EMBLEM ALLEGIANCE, CAN_BOOK.indb 23 14878600_A-1_USER GUIDE, EMBLEM ALLEGIANCE, CAN_BOOK.indb 23
EMBLEM/ALLEGIANCE Canadian User Guide
remove the buckle� See
page 36�
and buckle through the
desired slot in the cover�
NOTE: Slide the end of
the belly pad over the
comfort foam.
into the front buckle
slot and slide into the
corresponding buckle
position� Replace cover�
NOTE: Ensure the red
release button faces out.
time into the buckle�
NOTE: After inserting
each buckle tongue, listen
for a click to help ensure
proper connection.
and pull the tongues from
the buckle�
NOTE: Periodically clean
the buckle to ensure
proper operation. See
page 41.
a� Press tabs�
b� Pull apart�
to fasten�
NOTE: Always
position the
chest clip at
armpit level.
b
a
23
11/16/23 10:47 AM 11/16/23 10:47 AM