Britax EMBLEM ALLEGIANCE Guide D'utilisation page 28

BRITAX Child Safety, Inc.
Anti-Rebound Bar
In the event of a crash, the anti-rebound bar is designed to
prevent rebound rotation in rear-facing car seat installations�
The anti-rebound bar is not intended for use as a carry
handle� Do not use the anti-rebound bar to carry this
child seat�
IMPORTANT:
• The anti-rebound bar MUST be removed for forward-
facing installation�
• Keep fingers away from the anti-rebound bar connection
points to avoid finger entrapment or pinching�
Installing the Anti-Rebound Bar
1� With the car seat sitting
2� Place the car seat on
3� Locate the two ribs on
4� Attach the two hooks of
26
14878600_A-1_USER GUIDE, EMBLEM ALLEGIANCE, CAN_BOOK.indb 26 14878600_A-1_USER GUIDE, EMBLEM ALLEGIANCE, CAN_BOOK.indb 26
on a flat surface, pull the
recline handle, then rotate
the child seat shell into the
fully reclined position�
its back to access the
underside of the seat�
either side of the recline
handle�
the anti-rebound bar to
the metal rod between the
ribs on either side of the
recline handle, pressing
down until the hooks lock
into place�
IMPORTANT: Pull up on
the anti-rebound bar to
ensure the connection is
secure�
NOTE: See Installation Videos & User Guides in the
support section of the Britax website (us.britax.com/faqs)
for a video demonstration of this procedure.
11/16/23 10:47 AM 11/16/23 10:47 AM