Icematic And Ice Storage Container; Using The Water Dispenser - Beko RCNE520E42JX Manuel D'utilisation

Masquer les pouces Voir aussi pour RCNE520E42JX:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Using the product
5.16. Icematic and ice
storage container
*optional
Using the Icematic
Fill the Icematic with water and place it into its
seat. Your ice will be ready approximately in
two hours. Do not remove the Icematic from its
seating to take ice.
Turn the knobs on the ice reservoirs clockwise
by 90 degrees.
Ice cubes in the reservoirs will fall down into
the ice storage container below.
You may take out the ice storage container and
serve the ice cubes.
If you wish, you may keep the ice cubes in the
ice storage container.
Ice storage container
Ice storage container is only intended for
accumulating the ice cubes. Do not put water
in it. Otherwise, it will break.
Refrigerator / User Guide

5.17. Using the water dispenser

*optional
C
It is normal for the first few glasses
of water taken from the dispenser
to be warm.
C
If the water dispenser is not used
for a long period of time, dispose
of first few glasses of water to
obtain fresh water.
1. Push in the lever of the water dispenser with
your glass. If you are using a soft plastic
cup, pushing the lever with your hand will be
easier.
2. After filling the cup up to the level you want,
release the lever.
C
Please note, how much water
flows from the dispenser depends
on how far you depress the lever.
As the level of water in your cup
/ glass rises, gently reduce the
amount of pressure on the lever to
avoid overflow. If you slightly press
the arm, the water will drip; this is
quite normal and not a failure.
27/36EN

Publicité

Table des Matières
loading

Table des Matières