Felco 882-NP Manuel D'utilisation page 11

ENVIRONMENTAL PROTECTION:
Your device contains a number of materials that can be
repurposed or recycled. Hand it over to your reseller or
an authorised dealer for disposal.
SAFETY MEASURES
CAUTION
The pruning shears 06 are a cutting tool designed for
•
pruning trees, bushes, shrubs and vines. Keep your hands
away from the cutting area. Contact with the blade may
result in injury.
Avoid unintended starting. Make sure that switch 01e is in
•
the off position before connecting the pruning shears 06 to
the control unit 01b.
Do not be hasty. Maintain an appropriate position and
•
balance at all times. That allows better control of the pruning
shears 06 in unexpected situations.
FELCO SA shall not be liable in the event of damage
•
resulting from inappropriate use or use other than that for
which the equipment has been designed.
FELCO SA shall also not be liable for damage resulting from
•
the use of non-original parts or accessories.
Use personal protective equipment. Wearing safety
•
equipment such as gloves, protective eye wear or ear
protection will reduce the risk of injury.
Only use FELCO blades in perfect condition. Deformed or
•
blunt blades can break or have an adverse effect on the
cutting quality.
Before working on the pruning shears 06, disconnect the
•
pruning shears cable 01d and battery from the control unit.
Check that the blade of the pruning shears 06 is properly
•
adjusted. A blade that is not properly adjusted may present
a risk of injury and could damage the pruning shears 06.
Beware of flying material that could cause injury or damage
•
to property. The user and bystanders must wear protective
eye wear.
Always wear appropriate shoes and clothing.
•
SAFETY MEASURES RELATED TO THE USE OF THE 882
POWER PACK
The FELCO Power Pack 882 is designed exclusively for
•
powering and controlling FELCO portable power tools.
Check that the switch 01e is in the off position before
•
connecting/disconnecting the battery 02 or the pruning
shears 06 from the control unit 01b.
Disconnect the pruning shears cable 01d from the pruning
•
shears 06 before any work is carried out on them.
The control unit 01b may never be opened.
•
Keep the FELCO Power Pack 882 out of the reach of
•
children.
Do not store the FELCO Power Pack 882 in a damp place.
•
Never carry the pruning shears 06 or the FELCO Power
•
Pack 882 by the cable 01d
Do not attempt to cut wood with a particularly large cross
•
section or materials other than wood, unless otherwise
indicated.
When the tool is not in use, close the blade of the pruning
•
shears 06 and always set the switch 01e to the Off position,
in order to prevent injuries and deep discharge of the
battery 02.
The use of a battery 02 different from those supplied by
•
FELCO SA is hazardous and prohibited (risk of serious
injury). In that case, FELCO SA shall not be liable in any
way.
Do not use the FELCO Power Pack 882 and its contents for
•
any application other than that for which they are designed.
Do not use the FELCO Power Pack 882 and its contents if
•
their appearance is not as it should be (deformation, strange
odour, smoke, etc.).
inconvenience people who have inhaled them.
The FELCO Power Pack 882 may not be used by people
•
wearing pacemakers without the permission of a physician.
Keep a minimum safety distance of 20 cm between the free
•
hand and the pruning shears 06.
SAFETY MARKINGS
Do not use in the rain.
FELCO Power Pack 882 AND ITS CONTENTS are
to be used with caution.
FELCO Power Pack 882 AND ITS CONTENTS
comply with CE standards.
The equipment must be used in a temperature
range between -5°C (+23°F) and +30°C (+86°F).
TECHNICAL SPECIFICATIONS OF FELCO POWER PACK 882
Machine description
Model
Type
Power supply for the FELCO
Power Pack 882:
Weight of the FELCO Power
Pack 882
Acceleration to which the
upper limbs are exposed
according to EN 50260-1:
2004 (value increased by
K=1.5 m/s2):
Fumes could temporarily
FELCO Power Blade
Series®
Battery-powered pruning
shears
FPBS
FELCO 882
Li-Ion battery max 42 V
950 g
ah < 2.5 m/s max.
2
11 11