Using The Radio; Using The Cd Player - Thomson Rcd150 Manuel D'utilisation

USING THE RADIO

Switching on the appliance (19) and the selector (6) on FM or
MW

USING THE CD PLAYER

Switching on the appliance (19) and the selector (6) on CD/
MP3.
cardboard lens protector located inside the CD compartment
(4). To open the CD compartment lift the door using the recess
(7).
The program function allows you to program the order in which
the disk tracks are played. Up to 20 tracks may be programmed.
Note: Programming can only be done in STOP mode.
Press the
screen.
Use the buttons (10) or
track.
Press the PROGRAM button again (12
selection and store the track. The program number is
Repeat these 2 steps to program other tracks.
(12). "P01" blinks on the LCD
(9
PORTABLE CD RADIO
RCD150
Note: Once the memory capacity for the titles to be programmed
programming has been completed.
Press button (14) in order to start playing the tracks. The
tracks are played in the programmed order.
Press button (13) once to stop playing without deleting
the program. The program indicator «PROG»is still displayed.
To cancel the program function press button
(13) twice: the program indicator «PROG»switches off.
Playback stops automatically after the last track has been played.
disk is removed or the appliance is switched off.
Programming of the tracks can be combined with the repeat
CD.
USAGE
13 EN