Kenwood DNX719VHD Guide De Démarrage Rapide page 25

Connecting wires to terminals (2)
Ignition key
switch
Car fuse box
(Main fuse)
Battery
To use the steering wheel remote control feature,
you need an exclusive remote adapter (not
supplied) matched to your car.
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
To use the Mute feature, you need to hook up this
wire to your telephone by using a commercial
Depending on what antenna you are using, connect
either to the control terminal of the motor antenna,
or to the power terminal for the booster amplifier
of the film-type antenna. (Max. 300mA, 12V)
When using the optional power amplifier, connect
to its power control terminal.
If no connections are made,
do not let the cable come out from the tab.
ACC
Red (Ignition wire)
Yellow (Battery wire)
Car fuse box
Black (Ground wire)
(To car chassis)
A
A
Light Blue/Yellow
(Steering remote control wire)
To steering remote
To car light control switch
telephone accessory.
25
Accessory 1
STEERING WHEEL
REMOTE CONT
REMOTE INPUT
Orange/White
(Dimmer control wire)
ILLUMI
Brown (Mute control wire)
MUTE
Blue
(Antenna control wire)
ANT. CONT
Blue/White
(Power control wire)
P. CONT
DNX719VHD