Creating Shift Keys In Vcom Mode; Reduced Modifications To The Joystick Default Settings - Videotec DCZ Manuel D'instructions

9.7.2.1 Creating shift keys in VCOM mode

The keyboard can have up to 8 shift keys, used to
change the behaviour of ordinary keys.
Example: Transform key 86 into shift key number 1,
and key 87 into shift key number 7.
OPERATION / COMMAND
Enter the programming settings
Select 4 .
Disconnect and reconnect the
keyboard.
[BlockModeStart]
Command.
[LookupWrite86,1001]
Command.
[LookupWrite87,1007]
Command.
[BlockModeEnd]
Command.
Tab. 05
To check the correct definition of the shift keys:
• Press ESC (key 1,3) without any shift key: The
keyboard sends the code [K+13];
• Press INFO (key in line 8, column 6, defined as
shift number 1) and
[K+13:1]. The shift keys that have been pressed
are identified by the colon;
SHIFT
• Press (arrow-up symbol, key in line 8,
column 7, defined as shift number 7) and
The keyboard sends the code [K+13:7];
• Press INFO , SHIFT
sends the code [K+13:17].
EFFECT
It switches to VCOM mode
resetting the joystick
lookup chart.
It restarts in VCOM mode
This allows you to
modify the internal
memory without using
it for multiple writing
commands.
Creates the shift key 1
changing the behaviour of
key on row 8, column 6.
Creates the shift key 7
changing the behaviour of
key on row 8, column 7.
Saves the modifications to
the internal memory.
ESC : The key sends the code
ESC
and ESC : The keyboard
9.7.2.2 Reduced modifications to the
joystick default settings
Example: If you want to maintain most of the central
group of keys, move key 1, create a double key for
number 2.
OPERATION / COMMAND
Enter the programming settings
Select 5 .
Disconnect and reconnect the
keyboard.
Enter the programming settings again
7
Select .
Disconnect and reconnect the
keyboard.
[BlockModeStart]
Command.
[LookupWrite34,0]
Command.
[LookupWrite31,60001]
Command.
[LookupWrite32,60002]
Command.
[BlockModeEnd]
Command.
Enter the programming settings
Select 8 .
:
Disconnect and reconnect the
keyboard.
Check that the corresponding
LEDs come on when the keys
are pressed.
Tab. 06
EFFECT
Resets the JOYHID key
chart to default settings.
It restarts in JOYHID mode.
It switches to VCOM mode
without resetting the
joystick lookup chart.
It restarts in VCOM mode.
This allows you to
modify the internal
memory without using
it for multiple writing
commands.
Cancels key 1 from the
default position (row 3,
column 4)
Assigns key 1 (60001) to
the key on row 3, column 1.
Creates a second 2 key on
row 3, column 2.
Saves the modifications to
the internal memory.
Switches to JOYHID mode
without resetting the
lookup chart that has just
been modified.
It restarts in JOYHID mode.
17