VOLTCRAFT DPPS-60-8 Mode D'emploi page 62

G File management
H Transfer settings
I Ouput on/off
J Current
K Voltage
L Output on/off
M Settings
N Status
62
Export table/settings as .csv file.
Import .csv formatted table/settings
Print current view
Transfer set voltage and current to power supply.
Activate/deactivate power supply. Confirm input with button (H).
The LED display displays "O P OFF".
The field where you can program the current to the power supply.
After inputting the value, press the enter button (H) to transfer the
settings to the power supply. Optionally, you may set the current
by the slider.
The field where you can program the voltage to the power supply.
After inputting the value, press the enter button (H) to transfer the
settings to the power supply. Optionally, you may set the voltage
by the slider.
Activate/deactivate power supply. Click on the control. While the
output is deactivated the LED display displays "O P OFF".
You can read the voltage setting and current limitation of the
power supply.
You can read the present voltage, current and power output of
the power supply. "C.V" is equivalent to the C.V. indicator; "C.C."
is equivalent to the C.C. indicator.