Completely read through the operating instructions, the
„Warranty and Additional Information" booklet as well
!
as the latest information under the internet link at the end
of these instructions. Follow the instructions they contain.
These documents must be kept in a safe place and passed
on together with the product.
Intended use
Lengths, areas and volumes can be measured at a distance of up to
30 metres with this laser distance measuring device. The device is suitable
for continuous measurement and offers a choice of front or rear housing
reference points.
General safety instructions
– The device must only be used in accordance with its intendedpurpose
and within the scope of the specifications.
– Keep the measuring device away from children.
Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will
otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail,
the battery charge is weak, or the housing has been damaged.
– When using the device outdoors, make sure that the weather conditions
are appropriate and/or that suitable protection measures are taken.
– Please ensure compliance with the safety regulations set out by local
and national authorities with regard to the correct and proper use of
the device.
Safety instructions
Using class 2 lasers
EN 60825-1:2014/A11:2021 / EN 50689-1:2021
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should
shut their eyes and immediately move away from the beam.
– Tampering with (making changes to) the laser device is not permitted.
– Under no circumstances should optical instruments
(magnifying glass, microscope, binoculars,...)
10
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 515 nm