After Cooking; Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher BETA Mode D'emploi

After cooking

•
Turn the temperature dial and steamer dial to the position marked „0", and the
multifunction dial to the position marked „
•
To turn the device off, turn the main dial / time dial to the position marked „
•
Close the water flow tap (for models with a water connection).

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o To ensure proper functioning, cleanliness and power of the device, clean it at the end
of every working day.
o Before cleaning, disconnect the device from its power supply, close the water valve
and leave the cooking compartment to cool.
o Wash the cooking compartment with lukewarm water and appropriate cleaning
substances. Wash the chamber thoroughly with clean water and ensure no remaining
cleaning substances can be found. Dry the cooking compartment.
o Use only special products for cleaning stainless steel, using inappropriate
substances may cause corrosion in the oven.
o When washing surfaces made of stainless steel use only stainless steel wool.
Never use brushes or scrapers.
o Do not use any substances containing chlorine (whiteners, hydrochloric acid, etc.).
o After washing, use a soft, dry cloth to dry and polish the device's surface.
- 46 -
".
".