Functional Description; Intended Use; Product Features - Bosch GST 120 E Professional Notice Originale

OBJ_BUCH-655-004.book Page 8 Wednesday, July 1, 2009 5:13 PM
8 | English
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ce-
ramic plates and rubber while resting firmly on
the workpiece. It is suitable for straight and
curved cuts with mitre angles to 45°. The saw
blade recommendations are to be observed.
1 609 929 S83 | (1.7.09)

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Plastic cap
2 Lock-on button for On/Off switch
(GST 120 BE)
3 On/Off switch
4 Thumbwheel for stroke rate preselection
5 Vacuum connection*
6 Sliding shoe*
7 Base plate
8 Switch for sawdust blowing device
9 Adjusting lever for orbital action
10 Stroke rod
11 Guide roller
12 Saw blade*
13 Contact protector
14 Dust cover for vacuuming*
15 SDS clamping lever for saw blade release
16 Handle (insulated gripping surface)
17 Vacuum hose*
18 Extraction adapter*
19 Splinter guard*
20 Scale for mitre angle
21 Thumbwheel for pre-tension of base plate
22 Base plate clamping lever
23 Lead for the parallel guide
24 Locking screw for parallel guide*
25 Parallel guide with circle cutter*
26 Centring tip of the parallel guide*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools