Publicité
Les langues disponibles
Les langues disponibles
156
camera).
• ND.F: Indicates the neutral filter number on.
• NEXT: Indicates whether the status display continues onto a second page. If so, press
"+" or "-" on the front of the camera to display the second page.
• PED: Indicates the master pedestal value.
• PREVIEW: Indicates whether the display is the second status page. If so, press "+" or
"-" on the front of the camera to display page 1.
• SHUT: Indicates whether the shutter is "ON", by indicating exposure time, or "OFF".
• SK.DTL: Indicates whether the device used to decrease the detail level of flesh colours
(flesh tones) is "ON" or "OFF".
• VERS: Indicates the camera software version number.
• VF: Indicates that the viewfinder video is selected.
• WARNING: Indicates the number of "warnings". The "warning" is an alarm to warn
the user that an operational adjustment is not in the nominal position, or that the camera
supply voltage is too low.
- The operational settings causing a warning are: effect filter ≠ clear, neutral filter ≠
clear, extender ON, offset iris (I +/-) ≠ 50, DFZ ON, stepped gains ≠ 0 db, knee OFF
(subsequent to maintenance operation) or AUTO, detail OFF (subsequent to
maintenance operation), shutter ON, clear scan ON, skin detail ON, ABL ON.
- The "warning" settings are indicated by an exclamation mark ("!") displayed instead
of the colon (":") following the setting.
- For the supply voltage, the "!" will flash when the battery is almost discharged.
• WBL: Indicates the white balance memory ("A" or "B") selected, followed by the
computed colour temperatures. If the balance is on "PRESET", "P" followed by "3100"
or "5600" is displayed indicating the preset type (clear or day).
THOMSON TTV 1657D
User manual
Chapter 2 - Camera
Camera operation
B1657D902D
October 2001
Publicité
