Remote Control Display Indicator - Electrolux EXO27HEIWE Manuel D'utilisation

Masquer les pouces Voir aussi pour EXO27HEIWE:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 40
16 www.electrolux.com
to detect the actual temperature at its
location. The remote controller will send
this signal to the air conditioner every
3 minutes interval until press the Follow
Me button again. The air conditioner will
beep to indicate the Follow Me feature
has ended if it does not receive the signal
during any 7 minutes interval.
ON/OFF BUTTON
Operation starts when this button is
pressed and stops when the button is
pressed again.
FAN SPEED BUTTON
Used to select the fan speed in four steps.
AUTO
TIMER ON BUTTON
Press this button to activate the Auto-on
time setting. Each press will increase the
time setting in 30 minutes increments, up
to 10 hours, then at 1 hour increments up
to 24 hours. To cancel the Auto-on time
setting, just press the button until the time
setting is 0.0.

6. REMOTE CONTROL DISPLAY INDICATOR

1
MODE display
2
Transmission Indicator
3
Temp./Timer display
4
ON/OFF display
5
MODE display(FAN mode)
LOW
MED
HIGH
1
ECONOMY/SLEEP BUTTON
Press this button to activate the Energy-
Saving mode. Press again to stop
the function. This function is available
on COOL, HEAT or AUTO mode only
and maintain the most comfortable
temperature for you.
TIMER OFF BUTTON
Press this button to activate the Auto-off
time setting. Each press will increase the
time setting in 30 minutes increments, up
to 10 hours, then at 1 hour increments up
to 24 hours. To cancel the Auto-off time
setting, just press the button until the time
setting is 0.0.
LOCK BUTTON
When you press the Lock button,all
current settings are locked in and the
remote controller does not accept any
operation except that of the Lock. Press
again to cancel the Lock mode.
TURBO BUTTON
Push this button to activate the Turbo
function which enables the unit to reach
the preset temperature at cooling or
heating operation in the shortest time(if
the unit has no this function, there is no
corresponding operation happened when
press Turbo button.)
2
3
4
SET TEMPERATURE
TIMER ON OFF
9
8
7
6
FAN SPEED display
7
FOLLOW ME display
8
TIMER display
9
LOCK Indicator
5
6

Publicité

Table des Matières
loading

Table des Matières