Cleaning And Care - KITCHEN CREW Mason Jar Mode D'emploi

Cleaning and care

After every use, the blender jug should be cleaned and dried as follows.
Insufficient or improper care of the device may affect the smoothie maker's
functional efficiency.
1. Before cleaning, always switch off the device and remove the power plug
from the socket. Wipe the device housing with a damp cloth.
2. Do not use abrasive detergents.
3. Carefully clean the blade assembly and make sure not to get injured by
the blades during cleaning and drying off the blender jug. The blades are
sharp!
4. The device, connection cable and plugs must not come in contact with
water or be put into the dishwasher. Danger of electric shocks!
5. Cleaning of lids, glass, bottle and blade base: To remove residues from
the individual parts, rinse them under warm water using a mild detergent.
Alternatively, you could also fill the glass and the bottle up to a third with
warm water and some detergent, put on the blade base and mix for ca. 15
seconds. Unscrew the blade base, rinse the individual parts with clear water
and let them air dry.
6. Only the glass and the bottle can be put into the dishwasher.
7. Remove sealing rings and blade base, rinse under running water and dry
with a soft cloth. Put the sealing rings back in for the next use. Please note:
The thick sealing ring is part of the lid, the thin one is part of the blade
base.
The device, power cord and plug must not get in contact
with water. Beware of sharp blades when cleaning the blade
assembly and the blender jug.
24