KITCHEN CREW Mason Jar Mode D'emploi page 19

12. Do not use any sharp or metallic
items in the blender jug. It could
get scratched. Always use a pla-
stic or wooden scraper to remove
the ingredients from the blender
jug.
13. After use, before cleaning, and in
case of problems during opera-
tion, always remove the power
plug from the socket and let the
device cool down completely.
14. Never operate the device with
accessories of other devices as
this might result in injuries, fire, or
electric shocks.
15. Improper repairs could pose a
danger to the user and result
in the voiding of the warranty.
Should component parts be
defect, they must be replaced by
the manufacturer, an authorized
service partner or a similarly qua-
lified person.
16. Should the connection cable or
the device itself be defect, the
connection cable or the device
itself must be replaced/repaired
by the manufacturer, the custo-
mer service or a similarly qualified
person in order to avoid dangers.
In the case of repair, the defect
parts must only be replaced by
original spare parts.
17. Always disconnect the device
from the power supply when it is
unattended and before assem-
bly/disassembly or cleaning.
18. The device must be switched off
before changing accessories or
additional parts that move during
operation.
19. The maximum filling capacity
of the blender jug must not be
exceeded. When using highly fro-
thing ingredients, fill in less than
the maximum filling quantity.
20. Never run the device with an
empty blender jug.
21. The device must not be run for
more than 60 seconds at a time.
Let it cool down for 60 seconds
before using it again.
22. Never remove the blender jug
when the device is running. Do
not remove the blender jug until
the engine is completely stopped.
23. Never fill up the blender jug with
liquids of a temperature of over
50 °C in order to avoid injuries.
24. Do not make any changes to the
safety switch.
19