Parking Brake; Refuse Container - RCM Brava 1000 HT Manuel D'installation Et D'entretien

Balayeuse
Masquer les pouces Voir aussi pour Brava 1000 HT:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

When the motor-sweeper is at rest, the parking brake should be engaged, proceeding as follows:
Pull the handle 1 to engage the retainer 2 which secures the lever in the limit stop position.
The pads 3 will now lock the rear wheels.
To release the wheels, press the release lever 2 with the index fi nger of your right hand.
When the machine leaves dust on the ground this indicates that the refuse container is full, it is necessary to empty it:
Switch off the engine and take off the container 1 by unhooking it from the chassis by clamps 2
!
Caution!
Always stop the engine when taking out the container.
Re-fi t the container on its seat paying attention to couple it correctly with the chassis of the machine and re-hook
the clamps 2.
2
PARKING BRAKE (FIG.9)
2
1
3
REFUSE CONTAINER (FIG.10)
2
1
35
3
1

Publicité

Table des Matières
loading

Table des Matières