Maintenance - Wolf Garten LI-ION POWER HSA 45 V Mode D'emploi

Masquer les pouces Voir aussi pour LI-ION POWER HSA 45 V:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Adjust blade head
In order to ensure the same, ergonomically ideal
handling in all cutting situations the blade head has
a 5-position latching mechanism
1
Attention! Reverse blade
Perform adjustments to the device only
when the motor is off and the blade is idle.
1. Press the locking button down
2. Rotate the blade head into the desired posi-
E
tion
(2).
3. Now release the locking button.
4. Check whether the blade head is in place (the
hedge shears can only be switched on if the
blade head is snapped in).
Switching the hedge shears on/off
Make sure that your hands are steady when
working above head height.
Hold the blade away from your body.
Motor on
G
1. Hold down the safety switch on the bowed
handle (1).
2. Press the on/off button on the hand grip (2) at
the same time.

Maintenance

General
1
Attention! Reverse blade
Before all maintenance and cleaning work:
Pull out the power plug.
Do not touch moving blades.
Cleaning
Clean the hedge shears with a dry towel, par-
ticularly the ventilation slits, after each use or
using a brush in the case of heavy soiling.
Spray the blades with oil after each use.
Under no circumstances spray the hedge
shears off with water.
16
E
F
.
E
(1).
Motor off
G
Release one of the two buttons.
Tips for cutting
Please observe the brooding season of the
birds!
The ideal hedge cutting form is the trapezoid
L
, which provides for adequate light and
ventilation for all parts of the hedge.
In order to promote thick growth of young
hedges, only half of new shoots should be cut.
If the hedge has already reached the desired
height, new shoots can be completely re-
moved.
In order to achieve a steady hedge height you
can string up a guide wire at the desired height
and cut along this wire.
Cutting seasons:
Deciduous hedges: May/June and October
(cutback to approx. 1/3 of the total height in
winter)
Conifer hedges: April and October
Conifers: April and October
Storage
Store the hedge shears in the blade scabbard
provided.
For easy storage the blade scabbard can be
mounted on the wall
We recommend using the drill template (see
page 44) for simple wall-mounting of the
blade scabbard.
Store the hedge shears in a dry location out of
the reach of children.
H
J
K
L
M N
.
G

Publicité

Table des Matières
loading

Table des Matières