Siemens MQ964 Série Mode D'emploi page 6

MQ964-Uniklein_de-kk-ar.book Seite 6 Donnerstag, 4. Dezember 2014 3:45 15
en
Place the base unit on the attachment

and lock into position.
Insert the mains plug.

Important information
When the rear aperture is open, the
appliance can be operated in fast and
continuous operation only. Selector switch
1–5 will not function. Move slide for
actuating the lock in switch position 0/Off
only.
Hold the base unit and universal cutter

firmly and switch on the appliance at setting
M. The best results are achieved by
operating the appliance intermittently
(switch on briefly, pause, switch on briefly,
...).
Never lift universal cutter off the work
surface!
After using the appliance:
After work, set the hand mixer to 0.

Wait until the tools come to a standstill.
Remove mains plug.

Remove base unit from the attachment

by simultaneously pressing both release
buttons.
Rotate attachment in an anti-clockwise

direction and remove from the universal
cutter-jug.
Take hold of the blade by the plastic

handle and take out.
Place the lid on the universal cutter to

keep in the processed ingredients.
6
Cleaning
Warning!
Never immerse the attachment of the
universal cutter in liquids and do not clean
under flowing water or in the dishwasher.
Universal cutter jug and blade are

dishwasher-safe.
Wipe the attachment with a damp

cloth only.
Subject to alterations.