General Safety And Application Notes - Lenze L−force 9400 Instructions De Montage

General safety and application notes

{
Danger!
Dangerous electrical voltage!
Dangerous electrical voltages may be applied to the connections of the brake
switch.
Possible consequences:
Death or severe injuries when touching the terminals.
ƒ
Protective measures:
Disconnect the standard device and the brake switch from the mains
ƒ
before carrying out any operations.
Check that all power terminals are deenergised.
ƒ
(
Stop!
The motor brake control includes an electronic switch which can control a
motor holding brake.
The motor brake control module may only be connected to holding brakes
which correspond to the permissible data specified in the technical data.
If the permissible values specified in the technical data are not complied with:
The motor brake control module can be destroyed.
ƒ
A safe operation of the motor holding brake cannot be guaranteed.
ƒ
Further notes in the documentation of the standard device must be observed!
EDK94AZHN25 DE/EN/FR/ES/IT 2.2
General safety and application notes
l
Safety instructions 1
29