Technical Specifications - HomeMatic HM-ES-PMSw1-PI Mode D'emploi

The range of transmission within buildings can differ greatly
from that available in the open air. Besides the transmitting
power and the reception characteristics of the receiver,
environmental factors such as humidity in the vicinity have an
important role to play, as do on-site structural/screening
conditions.
If "secure transmission" (AES) is activated for the switch
actuator with power metering, this implies:
• increased volume of communication traffic
• actuator groups are unable to execute commands simultane-
ously.
Please refer to the HomeMatic WebUI Manual at www.homematic.com
for further information on secured operation.
eQ-3 Entwicklung GmbH hereby declares that this device complies with
the essential requirements and other relevant regulations of Directive
1999/5/EC.
You can find the full declaration of conformity at www.homematic.com.
12

Technical specifications

Device short description:
Supply voltage:
Current consumption:
Power consumption in standby:
Degree of protection:
Ambient temperature:
Degree of pollution:
Measurement category:
Technical specifications
HM-ES-PMSw1-PI-DN-R1
230 V/50 Hz
16 A (max.)
< 0.6 W
IP20
-10 to +35 °C
2
CAT II
39