DeWalt DCT414 Guide D'utilisation page 4

Masquer les pouces Voir aussi pour DCT414:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
c) Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools
are dangerous in the hands of untrained users.
d) Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other
condition that may affect the power tool's operation. If
damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
e) Use the power tool, accessories and tool bits, etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another battery
pack.
b) Use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk of
injury and fire.
c) When battery pack is not in use, keep it away from other
metal objects like paper clips, coins, keys, nails, screws,
or other small metal objects that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Safety Information for Lasers and IR
Thermometers
WARNING: Laser Radiation Exposure. Do not disassemble
or modify the IR thermometers. There are no user serviceable
parts inside. Serious eye injury could result.
WARNING: Hazardous Radiation. Use of controls or adjustments
or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
• Do not operate the IR  thermometers in explosive
atmospheres, such as in the presence of flammable liquids,
gases, or dust. Power tools create sparks which may ignite the
dust or fumes.
• Use the IR thermometer only with the specifically designated
D
WALT batteries. Use of any other batteries may create a risk of
E
fire.
• Store the IR thermometer out of reach of children and
other untrained persons. Lasers are dangerous in the hands of
untrained users.
• Tool service must be performed only by qualified repair
personnel. Service or maintenance performed by unqualified
personnel may result in injury. To locate your nearest D
service center call 1-800-4-D
http://www.dewalt.com on the Internet.
• Do not use optical tools such as a telescope or transit to
view the laser beam. Serious eye injury could result.
2
WALT
E
WALT (1-800-433-9258) or go to
E

Publicité

Table des Matières
loading

Table des Matières