Hansgrohe Metris C 15404 1 Série Instructions De Montage / Mode D'emploi / Garantie page 6

1
3
2
3
1
6
 4
4 mm
1
1
5 mm
4 mm
English
Flush the hot and cold supplies -
shower only
(1) Remove the dust cover.
() Open the cold stop using a 4 mm Allen
wrench.
(3) Allow the cold supply to flush for at least
five minutes.
(4) Close the cold stop.

(1) Remove the flushing block using a 5 mm
Allen wrench. Turn it 90° and reinstall.
() Open the hot stop.
(3) Allow the hot supply to flush for at least 5
minutes.
(4) Close the hot stop.

Flush the hot and cold supplies
- tub/shower
(1) Remove the dust cover.
() Open both stops using a 4 mm Allen
wrench.
Allow the hot and cold supplies to flush for at
least 5 minutes.

4
4