Warranty Certificate; Cleaning And Maintenance - Ayce NT9008-20E Mode D'emploi

sequentially, 1-8h can be set. After setting is completed, press any other key to exit, or no key
operation within 5 seconds automatically exit. The icon
countdown, after the pending time to be finished, the machine will shutdown to enter standby
state; Timing shutdown icon and icon
6. Reservation " " is used to set an appointment on time: In the standby mode press
once to make an appointment, the icon
display shows the setting time; Continue to press
more time setting, press 1 h interval sequentially, 1-8 h can be set. After setting is completed,
press any other key to exit, or no key operation within 5 seconds automatically exit. The icon
stop flashing , and start to countdown, After the pending time to be finished , the machine will
start to work in the state which set by the appointment. the corresponding indicator icon lit,
and reservation icon will turn o .
7. Swing" ": open/close oscillating function: in the working state, press the icon
oscillating function will start to work , the icon
oscillating function will close, and the icon
8. Gear" "is used to set the machine work gear: the default boot is low-grade warm wind,
the icon lit; Press once, it will switch to high-grade warm wind, high-grade warm
wind icon on ; Then press once again, it will switch to the cold wind, that icon
on; Third gear button to switch to a low-grade warm wind again, the icon
in recycling.

CLEANING AND MAINTENANCE

Before undergoing maintenance, please disconnect the power cord plug out the power source,
1.
can be carried out after warm air blower cooling；
The surface area of dust, with a soft cloth to wipe;When the surface is too dirty, available
2.
below 50 degrees Celsius of the mixture of water and neutral detergent touch water to wipe
with a soft cloth and dry；
3. Do not use while clean gasoline, days that water, diluent and any easy to damage the surface
material; Because these things may react with heater and cause discoloration；
Product when not in use for a long period of time, unplug the power plug, wrap the machine to
4.
prevent dust into the machine；
When the heater should be cold, dry, packaged storage and dry ventilated place；as this may
5.
damage the appliance.
stop flashing , and start to
will no longer lit any more.
lit, the booking time icon flashing, the digital
to make an appointment once and
lit; Press the icon once again,
will turn o .
lit; then follow

WARRANTY CERTIFICATE

Congratulations! You have made an excellent choice with the purchase of this quality
product.Our commitment to quality also includes our service. Jumbo o ers an excellent
repair service, exclusively in Switzerland, for all ayce products.
Should you, contrary to expectations, experience defects due to material or manufacturing
faults during private use with in FIVE YEARS of the date of purchase we shall be liable for
5 5 5
5
JAHRE GARANTIE JAHRE GARANTIE
ANS GARANTIE
ANS GARANTIE
ANNI GARANZIA
ANNI GARANZIA
once,
The warranty certificate is only valid in connection with the receipt. Please keep both in a safe
place. The warranty does not a ect your statutory rights. The product is guaranteed for a
period of FIVE YEARS beginning on the day of purchase. Keep your purchase receipt safe as
proof of the date of purchase. The guarantee period can only be extended for the duration of
any repair required. During the warranty period, defective devices can be returned at every
Jumbo store. We will, at our discretion either repair or exchange the device in accordance with
warranty legislation.
Please include the following when returning your product for repair:
1. The receipt (proof of purchase)
2. This warranty certificate you're
your name, address, contact details and a fault description completed overleaf.
If the original receiptis not enclosed the repairwillbecharged for in all cases. After the
warranty has expiredyoucanstill return defectivedevices for repairs. Quotes as well as
repairsafterwarrantyperiod are to bepaid for in all cases.
Additional note service center:
Defect products can be returned to every jumbo store during the warranty period. After the
warranty period, the ayce products are accepted in any jumbo store, so the product may be
tested in accordance.
CH-Import & Distributed exclusively by:
Jumbo-Markt AG, 8305 Dietlikon
Tel. 044 805 61 11
warranty in accordance with statutory warranty regulations, provided
that:
- The device was not put to any use other than the intended.
- Was not overloaded.
- Was not used with the wrong accessories.
- Repairs where not carried out by any other than the authorized
workshop.
44 | 45 GB