Viewing Digital Video On Your Tv; Playing Back The Audio While Changing The Mixing Rate - Sony DVMC-DA2 Mode D'emploi

Viewing digital video on your TV (continued)
z Tip
TVs which conform to the
ID-1 system automatically
switch to wide mode
when the appropriate
signal is received.
Note
When the power on the
media converter is turned
off, the mixing rate is
reset to the default setting
(original audio: 100%,
added audio: 0%).
12 -US

Viewing digital video on your TV

You can enjoy high quality digital video when you
connect the DV unit to the TV via the media converter.
1
Press POWER to turn on the media converter.
2
Press DV IN.
The key indicator lights up.
3
Start playback on the DV unit.
Pictures played back on the DV unit appear on the
TV screen.
Playing back the audio while changing
the mixing rate
When playing back video recorded in 12-bit audio
mode on a DV unit via the media converter, you can
listen to: the recorded message and/or background
music only (post sound recording), the original audio,
or the combined audio of both tracks with the desired
mixing rate (5 steps).
Press and while holding DV IN, press ANALOG
IN.
Each time you press ANALOG IN, the mixing rate
changes as follows:
Original audio
.
100%
.
75%
.
50%
.
25%
.
0%
Added audio
0%
25%
50%
75%
100%