Before Using The Media Converter; Notes On The Connections - Sony DVMC-DA2 Mode D'emploi

Before using the
media converter

Notes on the connections

• Connect the AC power adapter (supplied) to the DC
IN 6V connector on the unit. Do not connect the
power source until all other connections are
complete.
• If you connect your TV to a VCR via the media
converter, you can watch VCR pictures whenever
the media converter is not turned on (with the AC
power adapter connected).
• Be sure to insert the connecting cable squarely into
the connector/jack to avoid malfunctions.
• Keep metal objects away from the connector pins to
avoid short circuits.
• If your PC has a 6-pin i.LINK (DV) connector, the
converting cable (4-pin˜6-pin) VMC-IL4615,
IL4635 (not supplied) is required.
If your analog video unit or TV has an S VIDEO
input/output connector
For higher picture quality, use the supplied S VIDEO
connecting cable to connect to the S VIDEO IN/OUT
connector of the media converter rather than the
VIDEO IN/OUT connector.
7 -US