On-Screen Menu - Abus TVAC10040 Manuel Utilisateur

9. On-screen menu

When the product starts operation for the first time, the standard OSD language is English. In
order to set a different language, you must press the following buttons:
Menu -> CH+ -> CH+ -> Source -> Source
To make changes to the monitor settings, a variety of menu items are available to choose from. To access
the on-screen display, please press the "Menu" button.
To navigate the menu correctly, please consult Section 8, "Button functions".
Picture mode
Brightness
Contrast
Color temperature
Audio, bass
Audio, treble
Automatic settings
Horizontal position
Vertical position
Phase
Cycle
These settings can only be entered when VGA signals are used.
Language
Picture-in-picture
- PIP mode
- PIP position
- PIP source
- PIP change
Menu
- Menu display time
- Menu transparency
- Horiz. position
- Vertic. position
Backlighting
Monitor format
Default parameters
Version
Energy settings
Video input
8
Vibrant / standard / soft / user def.
Brightness setting 0–100
Contrast setting 0–100
Warm / normal / cool
Decrease or increase audio bass 0–10
Decrease or increase audio treble 0–10
Automatic VGA picture adjustment
Horizontal position 0–100
Vertical position 0–100
Pixel phase 0–100
Pixel timer 0–100
English, French, German, Dutch, Danish or Polish
Picture-in-picture setting for several video inputs
None / small / medium / large / MLSR 4:3 / MLSR full
screen
Upper left / upper right / lower left / lower right
Additional input HDMI / DVI / VGA
Changes the two PIP screen inputs
OSD menu settings
Display unit display time for the menu 0–60 seconds
OSD transparency setting 0–10
Horizontal OSD position 0–100
Vertical OSD position 0–100
Backlighting low/medium/high
16:9 / 4:3
Restore default parameters
Firmware version
Setting for the mode to use following a power failure:
Always on / Always off / Last setting
Setting for the signal to use when switching the
monitor on. HDMI / DVI / VGA
English