Featured Connections; Installation; Power Supply; Ventilation - Abus TVAC10040 Manuel Utilisateur

5. Featured connections

HDMI input
HDMI input
DVI-D input
VGA input
Audio input
USB

Power supply

6. Installation

6.1 Power supply
Before starting installation, ensure that the mains voltage is the same as the rated voltage of the monitor
power supply unit.

6.2 Ventilation

Please ensure there is adequate ventilation. In order to guarantee adequate ventilation, it is important that
the ventilation openings are not covered.

6.3 Wall mounting

To mount the monitor on a wall, please use a VESA-compatible wall bracket.
The mounting holes, arranged in the shape of a square, are found on the rear of the monitor (75 mm from
the middle). The monitor is compatible with the ABUS TVAC10500 wall bracket.
Please remove the cover from the stand on the back of the monitor, and unscrew it.
Please observe the installation instructions accompanying the wall bracket.
The LED monitor must be disconnected from the mains power during installation.
VGA input
DVI-D input
HDMI video signal input
DVI-D video signal input
VGA video signal input
3.5 mm Jack audio input
For servicing purposes
DC 12 V max, 2 A power supply
USB
Audio
input
5
English
Voltage
supply