Menu Structure; Basic Menu Screen Operations; Menu Operation Procedures - Tascam CD-400U DAB Mode D'emploi

2 – Names and Functions of Parts

Menu structure

Press the main unit HOME/MENU button or remote control
MENU button to open the Menu screen.
The various menu items are as follows.
Menu item Function
Automatic power
saving function
APS Setting
setting
Dubbing automatic
muting function
DUB AutoMute
setting
Analog output
attenuation function
A.Out Att.
setting
Resume playback
Resume Setting
function setting
Incremental playback
Inc. Play
function setting
Serial Mode setting
Serial Mode
when Ethernet card
(when sold-separately
installed (sold-sepa-
Ethernet card installed)
rately)
RS-232C transmission
Baud Rate
speed setting
Tuner broadcast
Tuner Out Sel.
sound output setting
Show information
Information
Dubbing format
Dubbing Format
settings
Remote control lock
IR Remote Lock
function setting
Setting when Eth-
Network Set.
(when sold-separately ernet card installed
(sold-separately)
Ethernet card installed)
Restore factory
Factory Preset
default settings
NOTE
The settings for all menu items are retained even when the
unit is turned off.
16
TASCAM CD-400U DAB

Basic Menu screen operations

Operations are conducted on the Menu screen as follows.
Selecting items (moving vertically on a page):
Turn the MULTI JOG dial on the main unit.
Page
Use the . / / [ l / ; ] buttons on the remote control.
Confirming a selected item:
see page 38
Press the MULTI JOG dial on the main unit.
Press the remote control ENTER button.
see page 37
Opening a submenu from a page:
Press the MULTI JOG dial on the main unit.
see page 38
Press the remote control ENTER button.
Selecting an item in a submenu:
see page 27
Turn the MULTI JOG dial on the main unit.
Use the . / / [ l / ; ] buttons on the remote control.
see page 28
Going back one step in a menu:
Press the main unit BACK [PAIRING] button.
see page 38
Press the remote control k button.
Returning directly to the Home Screen from a
see page 38 Menu screen:
Press the main unit HOME/MENU button.
see page 33

Menu operation procedures

see page 39
see page 37
This example explains how to set the analog output attenuation
function.
see page 20
1.
Press the main unit HOME/MENU button or remote control
MENU button to open the Menu screen.
see page 39
2.
Turn the main unit MULTI JOG dial or use the remote con-
trol . / / [ l / ; ] buttons to select the setting item.
3.
Press the main unit MULTI JOG dial or remote control EN-
TER button to open the various setting screens.
4.
Turn the main unit MULTI JOG dial or use the remote con-
trol . / / [ l / ; ] buttons to change the setting.
5.
Press the main unit MULTI JOG dial or remote control
ENTER button to confirm the setting and return to the Menu
screen.
6.
Repeat steps 2 to 5 as necessary to set each item.
7.
Press the main unit BACK [PAIRING] button or remote
control k button to return to the Home Screen.
Menu
< APS Setting
APS Setting menu item shown
Menu
< A.Out Att.
A.Out Att. selected
A.Out Att.
< OFF
A.Out Att. screen open
>
>
>