Tascam CD-400U DAB Mode D'emploi page 11

PHONES
q
Use this standard stereo jack to connect stereo headphones.
Use an adapter to connect headphones with a mini plug.
Use the PHONES knob to adjust the headphone output level.
PHONES jack output can be lowered up to −18 dB in 1dB
intervals using the A.Out Att. setting screen. (see "Adjusting
the analog output" on page 38)
CAUTION
Before connecting headphones, minimize the volume with
the PHONES knob. Failure to do so could result in a sudden
loud noise that could harm hearing, for example.
AUX IN jack
w
This stereo mini jack is an audio line input jack.
Connect a portable digital player or other external audio
device here. (see "Using the AUX IN jack" on page 38)
CAUTION
i Before connecting another device to the AUX IN jack, mini-
mize the volume of that device. Failure to do so could result
in a sudden loud noise that could harm hearing, for example.
i Before connecting or disconnecting with the AUX IN jack,
set the current source to something other than AUX (CD or
Bluetooth) or turn the unit off.
Remote control signal receiver
e
Signals from the wireless remote control (TASCAM RC-CD400)
are received here. When operating the remote control, point
it toward this receiver.
1 [LOCK] button
r
i Press to input track number 1 when the current source is
CD, USB or SD and the play area is set to "ALL". (see "Selecting
tracks directly" on page 22)
i When the current source is DAB or FM, press to tune in a
preset station.
i When the unit is in shift mode (SHIFT indicator lit), press to
turn the panel lock function (which disables button use to
prevent misoperation) on/off. (see "Panel lock functions" on
page 20)
NOTE
i The number buttons on the unit (1 [LOCK] – 0 [DUB]) can be
used to specify numbers for track selection. For track num-
bers, a maximum of two digits can be input for audio CDs
and three digits for data CDs. (see "Selecting tracks directly"
on page 22)
i When in SHIFT mode (SHIFT indicator lit), pressing a number
button will change the setting of the function shown in white
lettering below the button.
2 [P.O.PLAY] button
t
i Press to input track number 2 when the current source is
CD, USB or SD and the play area is set to "ALL". (see "Selecting
tracks directly" on page 22)
i When the current source is DAB or FM, press to tune in a
preset station.
i When in SHIFT mode (SHIFT indicator lit), press to turn the
power-on-play function on/off. (see "Using the power-on-
play function" on page 27)
2 – Names and Functions of Parts
3 [P.MODE] button
y
i Press to input track number 3 when the current source is
CD, USB or SD and the play area is set to "ALL". (see "Selecting
tracks directly" on page 22)
i When the current source is DAB or FM, press to tune in a
preset station.
i When the current source is CD, USB or SD, and shift mode is
active (SHIFT indicator lit) press to cycle through the play-
back modes (ordinary, single and random). (see "Playback
modes" on page 25)
4 [REPEAT] button
u
i Press to input track number 4 when the current source is
CD, USB or SD and the play area is set to "ALL". (see "Selecting
tracks directly" on page 22)
i When the current source is DAB or FM, press to tune in a
preset station.
i When the current source is CD, USB or SD, and shift mode
is active (SHIFT indicator lit) press to turn the repeat
playback function on/off. (see "Ordinary repeat playback
settings" on page 26)
5 [A-B REP] button
i
i Press to input track number 5 when the current source is
CD, USB or SD and the play area is set to "ALL". (see "Selecting
tracks directly" on page 22)
i When the current source is DAB or FM, press to tune in a
preset station.
i When the current source is CD, USB or SD, and shift mode
is active (SHIFT indicator lit) press to set the A-B repeat
function starting (A) and ending (B) points. (see "A-B repeat
playback settings (audio CDs only)" on page 26)
6 [A. PRESET] button
o
i Press to input track number 6 when the current source is
CD, USB or SD and the play area is set to "ALL". (see "Selecting
tracks directly" on page 22)
i When the current source is DAB or FM, press to tune in a
preset station.
i When the current source is DAB or FM and shift mode is
active (SHIFT indicator lit) press to automatically program
the preset stations. (see "Setting radio station presets auto-
matically" on page 32)
7 [M.PRESET] button
p
i Press to input track number 7 when the current source is
CD, USB or SD and the play area is set to "ALL". (see "Selecting
tracks directly" on page 22)
i When the current source is DAB or FM, press to tune in a
preset station.
i When the current source is DAB or FM and shift mode is
active (SHIFT indicator lit) press to manually program the
preset stations. (see "Setting radio station presets manual-
ly" on page 32)
11
TASCAM CD-400U DAB