Safety Information - IARP JOY 30 LITE Instructions D'emploi Et D'entretien

5.3 SAFETY INFORMATION

Read the manual carefully and adhere to the contents before installing and using
the appliance.
Always keep the instructions manual safe and if the appliance is sold, hand it over to
the new owner.
This equipment is very dangerous if left exposed to rain, thunderstorms or bad weather
with the power cable plugged into the power socket.
The children must be supervised to ensure that they do not play with the appliance.
The equipment must not be used by persons (including children) whose physical,
sensorial, or mental capacities are reduced, or who lack experience and know-how,
unless they have been provided, by means of a person responsible for their safety,
with suitable monitoring or instructions about the use of the equipment.
Children must be monitored to ensure they do not play with the equipment.
Do not ever touch or handle the appliance with bare feet or with wet hands and feet.
The packaging materials, such as plastic bags, polystyrene, plastic cable ties, must not
be left in reach of children as they are potential sources of danger.
Do not let children play with the appliance e.g. sitting in the baskets or rocking on or
holding the cover, the cooler may overturn, or any items placed on top of it may fall
down.
After installing the appliance make sure that it is not positioned on the power cable.
To disconnect the appliance from the mains, take out the plug.
Do not pull the power cable out of it.
If the coolant circuit is damaged, it is strictly necessary to turn off the lights.
Do not store explosives, such as pressurized containers with flammable propellant,
in this appliance.
Never connect the cabinet to the power supply if it is damaged ( in transit or otherwise).
When in doubt, contact your service organization or dealer.
If the supply cord is damaged, it must be replaces by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Electronic elements may only be replaced by a qualified eletrician or person with
experience in electrical engineering.
-25-