Cleaning And Service; Technical Data - EUROMAC EUROM Electric Weedburner Mode D'emploi

 Remove the device from the coals or the wood as soon as it starts to glow
 Now blow hot air into the coals or the wood from a distance of around 10 – 20 cm, until
the coals or wood is burning properly.
 Doing this will help to avoid damaging the nozzle attachment. Exposing the nozzle to
high temperatures for a prolonged period of time could cause the materials to melt.
Please follow these instructions to achieve long-term enjoyment with the product.
Watch Out! To avoid overheating of the BBQ or Fireplace do not use the device for longer
than necessary.
Cooling and permanent switching off:
Before turning off the device permanently, it must be cooled first. Select temperature
setting I for at least one minute. The device can be switched off thereafter.
During cooling down the appliance can be placed on its stand to allow it to cool down
before storage. Never leave the appliance unattended!
Storage:
Make sure that the device has completely cooled down before storing.

CLEANING AND SERVICE

PAY ATTENTION! Take always the plug from the socket before you perfom cleaning- or
servicework and make sure that the device is completely cooled down.
 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use. Keep
the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water. Never use
solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the
plastic parts.

TECHNICAL DATA

Voltage
Power
Air flow
Setting I
Setting II
REMOVAL
In the EU this symbol indicates that this product may be disposed of as ordinary
household waste. Old equipment contains valuable materials, suitable for
recycling. These materials should be made suitable for reuse in order to
prevent any adverse effects to health and the environment caused by
unregulated waste collection. Therefore, please make sure that you bring old
equipment to a designated collection point. Alternatively, contact the original
supplier, who can make sure that as many of the components as possible can
be recycled.
230 – 240 V~ 50 Hz
2000 W
500 litres/minute
50 °C
600 °C