Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Starting the Data Logger using CONT
Prerequisite: Data logger is configured. Every time the meter has been
switched off, the data logger must be restarted (exception: SHOT).
Measurement
Measured value is maintained
Logger: CONT blinks
Address of the last recorded
value + 1 blinks
(proposed start address)
The measured value is saved to the selected start address (exception:
SHOT).
"... FREE MEMORY" is displayed.
"LOGGER" and "active logger type" icons are displayed.
Starting the Data Logger using START
Prerequisite: Data logger is configured. All existing entries are deleted. The
start address for saving the values is 0001. Every time the meter has been
switched off, the data logger must be restarted (exception: SHOT).
Measurement
Measured value is maintained
Logger: CONT blinks
Logger: START blinks
All entries will be deleted. "5000 FREE MEMORY" is displayed.
"LOGGER" and "active logger type" icons are displayed.
Data Logger
If desired: Select start address using
.
51
51
Publicité
Table des Matières
