Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Calibrating
MANUAL Calibration
(Manual calibration)
The calibration method is selected in the configuration menu.
Measurement
pH display blinks
mV display blinks
mV value blinks until calibration is completed, then successive display of:
Then the meter switches to measuring mode.
Note: To abort calibration, you can press meas at any time. This will be con-
firmed by the display message "CAL ABORTED". Exception: When you have
selected "CAL POINTS 1-2-3" and the first calibration step has been complet-
ed, the calibration process cannot be stopped any more.
44
The number of calibration points has been
selected in the configuration menu.
Use
to set the temperature-corrected
pH value taken from the buffer table.
Depending on the number of calibration
points, the procedure described above for
CAL 1/2/3 is repeated.
Publicité
Table des Matières
