Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Switching On the Meter
When you have connected the sensor, you can switch the me-
ter on by pressing the on/off or meas key.
When the meter is switched on with the on/off key, first a self
test is performed and then the calibration data and settings are
displayed before the meter switches to measuring mode.
When the meter is switched on with the meas key, it immedi-
ately switches to measuring mode.
Depending on the connected sensor and the specific measur-
ing task, several steps for configuration and calibration must
be performed as described on the following pages.
Icons
Important information about the state of the device:
Sensor
condition
Process
variable
Error message
Memosens sensor
Logger
Date
active
Time
Start-Up
Battery
charging
level
Temperature
detection
(sensor,
separate or
manual)
39
39
Publicité
Table des Matières
