Error Code - VITRA Tyde 2 Mode D'emploi

Troubleshooting/display
EN
Error codes may be displayed. Error codes appear on the display only when a key is pressed. The display flashes.

Error code

E01
E02, E028
E02, E029
E41-E52
E03
E41-E52
E16
An E and another error
code appear on the
display.
E40
E53-E64
If an error code is dis-
played for a long time or
an error occurs regularly.
22
(DPG1C02-000006)
Cause Solution
Initialisation Reset the unit.
Overload when 1. Move your table down more than 10 mm.
moving up 2. Your table will now be able to move up and down normally again.
Overload when 1. Remove all loads from the table.
moving up 2. Do not activate the table for 18 minutes.
1. Remove any objects that might be blocking the table and preventing it
Overload when
from moving down.
moving down
2. Do not activate the table for 18 minutes.
button pressed 1. The E16 error code only appears for as long as the button is held down.
accidentally. 2. Your table will now be able to move up and down normally again.
Internal error Contact your Vitra retail partner.
Overloading while
1. The E40 error code only appears for as long as the button is held down.
the table is being
2. Your table will now be able to move up and down normally again.
raised or lowered
1. Remove any objects that might be blocking the table.
Collision
2. Do not activate the table for 18 minutes.
1. Unplug the power cable.
Internal error
2. Contact your Vitra retail partner.