Call; Phone - Nokia 6080 Guide D'utilisation

Masquer les pouces Voir aussi pour 6080:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Call

Select Menu > Settings > Call and from the following options:
Automatic volume control — to set the phone to automatically adjust the output volume
according to the background noise
Call forwarding (network service) — to forward your incoming calls. You may not be able
to forward your call, if some call restriction functions are active. See Call restrictions in
"Security," p. 37.
Anykey answer > On — to answer an incoming call by briefly press any key (except the end key,
and the left and right selection keys)
Automatic redial > On — to set your phone to make a maximum of 10 attempts to connect
the call after an unsuccessful call attempt
1-touch dialing > On — to activate 1-touch dialing. To set up 1-touch dialing, see "1-touch
dials," p. 31. To dial, press and hold the corresponding number key.
Call waiting > Activate — to set the network to notify you of an incoming call while you
have a call in progress (network service). See "Call waiting," p. 17.
Summary after call > On — to briefly display the approximate duration and cost (network
service) of the call after each call
Send my caller ID (network service) > Set by network, Yes, or No
Line for outgoing calls (network service) — to select the phone line 1 or 2 to make calls, if
supported by your SIM card
Note: Check with your service provider regarding service availability.

Phone

Select Menu > Settings > Phone and from the following options:
Phone language — to set the display and writing language
Memory status — to view the free memory and the used memory in Gallery, Messaging,
and Applications
Automatic keyguard — to set the keypad of your phone to lock automatically after a preset
time delay when the phone is in the standby mode and no function of the phone has been
used. Select On, and set the time from 5 seconds to 60 minutes.
Security keyguard — to set the phone to ask for the security code when you unlock the
keyguard. Enter the security code, and select On.
When the keyguard is on, calls still may be possible to the official emergency number
programmed into your device.
Cell info display > On — to receive information from the network operator depending on the
network cell used (network service)
Welcome note — to enter a welcome note to be displayed briefly when the phone is switched on
34

Publicité

Chapitres

Table des Matières
loading

Table des Matières