Handling And Transportation - Palazzetti Idro Insertion Manuel D'installation, D'utilisation Et D'entretien

5 HANDLING AND
TRANSPORTATION
The appliance is delivered complete with all the
parts required.
Pay attention to the tendency for the appliance
to become unbalanced.
The centre of gravity of the appliance is carried
towards the front.
Bear in mind the above also when moving the
appliance on the transport stand. It is advisable
to unpack the appliance only when it has arrived
at the installation site.
The product must be handled and un-
packed using suitable means.
Make sure that children do not play with the pack-
aging components (e.g. films and polystyrene):
Danger of suffocation!
During moving, lifting, and unpacking of the
appliance the following is absolutely necessary:
• always keep it upright;
• never tip it over into a horizontal position;
• never tilt it on the front to avoid breaking the
glass of the fire box door.
• Removal of the transport pallet
Disposal can be entrusted to a third party, provid-
ed only companies authorised for the recovery
and elimination of the materials in question are
used.
Always follow the regulations in force in the
country in which the appliance is being used for
disposal of materials and possibly for the disposal
report.
To remove the appliance from the transport
pallet:
• Open the door;
• remove the safety bracket (A - Fig. 7) by loosen-
ing the two retaining screws;
• lift the sliding release lever (B - Fig. 7);
004778730 - 24/06/2021
ITALIANO
A
• pull the machine outwards until reaching the
guides end of stroke;
• remove the pallet retaining screws from the
base and remove the pallet (Fig. 8).
ENGLISH FRANÇAIS
B
Fig. 7
Fig. 8
65