Instructions Of Use - Jata Calor Rd227B Instructions D'usage

LEGS ASSEMBLING
• The legs (5) must be assembled at the end of the lower part of the appliance.
• Match the holes of the legs with the axes located in the lower part, then screw them.
FOLDING UPPER BARS
• Insert the four ends of the metal tubes into the four lugs of the plastic parts with folding bars. Next, with the
bars open, place the whole set in the top side of the appliance, making coincide the holes where the screws
will be placed. Screw them.

INSTRUCTIONS OF USE

• Unwind totally the cord from the cord storage.
• Plug in the appliance to the mains.
• Turn the thermostat knob (3) clockwise to the maximum position (MAX.)
• Place the power selector (2) in the desired position. Doing this operation the indicator (4) will light on. Have
in mind that:
- Position I: minimum power.
- Position II: maximum power.
- Position 0: off.
• Once the room reached the desired temperature, turn the thermostat knob (3) anti-clockwise until the pilot
light (4) goes off. Leave the knob in that position and the thermostat automatically maintains at the selected
temperature.
• The foldable bars (8) are used to hang and dry textile products with its upper position. Attention: avoid any
direct contact of the textile product with the appliance. If the appliance is on and the bars in their closed
position, never transport it by grabbing them.
Information requirements for electric local space heaters
Model identifier(s):
Item
Heat output
Nominal heat
out p ut
Minimum heat
output (indicative)
Maximum
continuous heat
output
Auxiliary electri­
city consumption
At nominal heat
output
At minimum heat
output
In standby mode
Symbol Value
p
2,0
nom
p
1,2
min
p
2,0
max,c
el
N/a
max
el
N/a
min
el
N/a
sB
Unit
Type of heat input, for electric storage local
space heaters only (select one)
kW manual heat charge control, with
integrated ther m ostat
kW manual heat charge control
with room and/or outdoor
temperature feedback
kW electronic heat charge control
with room and/or outdoor
temperature feedback
fan assisted heat output
Type of heat output/room
kW
temperature control (select
one)
kW single stage heat output and no
room tempera t ure control
kW Two or more manual stages, no
room tempera t ure control
with mechanic thermostat room
temperature control
with electronic room
temperature control
electronic room temperature
control plus day timer
electronic room temperature
control plus week timer
13
Item Unit
no
no
no
no
no
no
yes
no
no
no