Domo LINEA 2000 DO917GDK Mode D'emploi page 32

INSTALLATION
· Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth
and the inside with a wet, lukewarm cloth.
· Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources
nearby will cause higher electricity consumption. The ambient temperature must be
between 16 °C and 32 °C. The ideal ambient temperature is between 22 °C and 25 °C.
· Avoid very moist places.
· Before connecting your refrigerator to the power supply, check that the voltage stated
on the rating label of your appliance corresponds to the voltage in your home. A different
voltage could damage the appliance.
· Make sure that the air can circulate around the refrigerator. Above the refrigerator, there
must be at least 10 cm of free space, and on the sides this must be at least 5 cm. The back
of the refrigerator must be at least 13 cm away from the wall. Spacers have been provided
with the refrigerator to ensure that it cannot be pushed right up against the wall. Fasten
these to the back of the refrigerator.
· For uneven surfaces, front feet can be aligned.
· Install the handle.
16
32
DO917GDK