Publicité
Getting started with your Power Scrub Elite
To fill the Clean Water/Solution Tank:
1
Press down on top
latch of clean water
tank and pull to remove.
9
2
Twist off the clean water
cap on the top of the
clean water tank. Add
warm water to fill line and
replace cap. – DO NOT
BOIL OR MICROWAVE
WATER (Do not fill with
water above 140˚ F (60˚ C)
3
Twist off the solution
cap on the top of the
clean water tank and
pour cleaning solution
into tank. Replace cap.
:
™
4
Angle the Solution/
Clean Water tank back
on the base and click it
into place.
Publicité
