Installing Wire Guide And Drive Roll - Miller R-115 Mode D'emploi

5-5. Installing Wire Guide And Drive Roll

1
3
Tools Needed:
3/8 in.
2
1 Inlet Wire Guide
2 Intermediate Wire Guide
Install and secure inlet wire guide,
and intermediate wire guide.
3 Drive Roll (4)
Install drive rolls and turn drive roll
nut one click.
During maintenance intervals,
remove drive rolls, and clean
grooves using a wire brush. Check
groove of drive roll for pitting or
increase in the depth of the groove
indicating drive roll is worn out.
802 310-B
OM-193 471 Page 17