Section 4 − Specifications; Serial Number And Rating Label Location; Unit Specifications; Gun Recommendation Table - Miller R-115 Mode D'emploi

4-1. Serial Number And Rating Label Location

The serial number and rating information for this product is located on the rear panel. Use rating label to determine input power requirements and/or
rated output. For future reference, write serial number in space provided on back cover of this manual.

4-2. Unit Specifications

Type of Input Welding Power
Power Source Type
115 Volts AC
Constant Voltage
Single Phase
(CV) DC And
2 Amperes 50/60
Contactor Control
Hz

4-3. Gun Recommendation Table

Process
GMAW − Hard or Corded Wires
FCAW − Self-Shielding Wires
Notes
SECTION 4 − SPECIFICATIONS
Wire Feed
Speed Range
75 to 750 ipm
(1.9 To 19 mpm)
Max Spool Weight:
Gun
M25 Or M40
GA-40GL
Wire
Welding
Diameter
Circuit Rating
Range
100 Volts,
.030 To 3/32 in.
500 Amperes,
(0.8 To 2.4 mm)
100%
Duty Cycle
60 lb (27 kg)
Overall
Weight
Dimensions
Length: 23-1/2 in.
(597 mm)
Width: 10-3/4 in.
40 lb (18 kg)
(273 mm)
Height: 11 in.
(279 mm)
OM-193 471 Page 13