Lubrication - Heiniger Saphir CORD Notice D'utilisation

6.5 Lubrication

Fig. 10
Possible damage to the clipper!
Insufficient oiling of the clipping head will lead to warming and
will shorten the life of the clipper and its blades.
► Oil the clipping blades adequately during the clipping
session, at least once every 15 minutes, so that they do not
run dry.
► Use only the special oil supplied or a paraffin oil meeting
the ISO VG 15 specification.
► The supplied oil is free of poisonous substances and will
not cause irritations on either skin or mucous membranes.
After 21 days, it will have degraded to about 20%.
(CEL-L-33-T-82).
46
To obtain a well clipped
animal and to increase the
life of the device including
the clipping head, it is
necessary to apply a thin
coat of oil between the
upper and lower blades.
NOTICE
NOTE
Professional Animal Clipper