Hama KEY4ALL X2100 Mode D'emploi page 3

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

G Operating instruction
Controls and Displays
1. Battery compartment
2. [OFF/ON] switch (ON = green)
3. Bluetooth
status LED – 1st channel
®
4. Bluetooth
status LED – 2nd channel
®
5. Bluetooth
status LED – 3rd channel
®
6. Caps Lock / Power LED
7. Stand
8. Holder
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions
in a safe place for future reference. If you sell the device,
please pass these operating instructions on to the new
owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information
or important notes.
2. Package Contents
• „KEY4ALL X2100" Multi-Device Bluetooth
• These operating instructions
• 2 x 1.5V (AAA) batteries
2
3. Safety Notes
• The product is intended for private, non-commercial
use only.
• Protect the product from dirt, moisture and
overheating, and only use it in a dry environment.
• Do not use the product in areas where the use of
electronic devices is not permitted.
• Do not use the product in moist environments and
avoid splashes.
• Do not drop the product and do not expose it to any
major shocks.
• Dispose of packaging material immediately according
to locally applicable regulations.
• Do not modify the product in any way. Doing so voids
the warranty.
4. System requirements
The keyboard works with Bluetooth
and smartphones running iOS, Android and Windows.
The requirements for keyboard use are as follows:
• Android devices require Android 4.0 or newer.
• Apple devices require iOS 7.0 or newer.
• Windows devices require Windows 7, Windows 8,
Windows 10 or newer.
Check whether the latest version is installed and, if
necessary, perform a software update.
Keyboard
®
Note
• To ensure that the keyboard functions properly,
check that the right keyboard layout (QWERTZ,
QWERTY etc.) is set in your device's settings.
• Note that support for certain key functions may vary
depending on your device.
• If some keys on the Bluetooth
work properly on your device for software reasons,
you can run them via the virtual keyboard.
• Please refer to the operating instructions for the
device you are using.
-enabled tablet PCs
®
keyboard do not
®

Publicité

Table des Matières
loading

Table des Matières